BARONKASE LIQUID is a new MATX size all-metal case that features a pre-installed Integrated Liquid Cooling System with a 120mm Radiator. It supports a full sized ATX mainboard, which is achieved by allowing the PSU to be mounted at the top of the case towards the front and bringing power to the PSU with an extension cable provided. Full length graphics cards can also be fitted by removing a name plate on the back panel.
The BARONKASE LIQUID case features a multi-point lighting system with manual control from the top panel. A tempered glass side panel safely mounted on soft buffered screws allows all the interior features to be seen and admired.
MATX Case supports installation of ATX Motherboard by installing the PSU at the top of the case towards the front
Integrated Liquid Cooling System with 120mm Radiator Pre-installed
Stylish new flow-rotor unit makes liquid flow visible and attractive
RGB Lighting System:
1 RGB Fan
2 RGB Water-block
3 RGB Flow-rotor Unit
4 RGB Front Light
Tempered Glass side-panel fixed to case body with screws and soft washers to cushion the glass and fix it firmly and safely
Tempered Glass side-panel fixed to case body with screws and soft washers to cushion the glass and fix it firmly and safely
Easier and more user friendly cable management with Velcro attachment areas provided
AC Power Extension Cable supplied to allow PSU to be installed at the top of the case when an ATX MB is fitted
Manual controller for RGB Lighting system
All-metal handle makes your PC portable
Two USB3.0 ports
Nameplate at rear!
The plate can be removed to allow longer Graphic Cards to be installed (340mm max)
The carry handle is removable when not required
Two 120mm cooling fans can be installed in the base of the case if the PSU is fitted in the top position
The water-block is supplied mounted on a specially designed board to keep it stable and safe during transportation
A special position is reserved for installing and displaying your SSD perfectly
The All-metal Front Panel is available in a choice of Black or White
MATX Size Supports ATX MB
Tempered Glass Side-panel
Pre-installed Integrated Liquid Cooling System with 120mm Radiator
Combined RGB Lighting System with Manual Controller
All-metal Front Panel

Application For

Intel Socket 150W


High End Desktop i7
Core i7/i5/i3
Pentium G
Celeron G
AMD Socket 140W


APU A12/A10/A8/A6/A4
FX 8/6/4-Core
Phenom II X6/X4/X3/X2
Athlon II X4/X3/X2
Athlon X4

Technical Spec

Materials SPCC(thickness: side panel:0.7mm, Glass: 4mm, Front panel:1.2mm)
Product Dimension (LxWxH) 423×215×470mm
Weight Net Weight:10 kg; Gross Weight:11 kg
I/O Panel 2×USB3.0 /Audio(HD)×1/Mic×1/Manual Controller for RGB
Motherboards ATX/MATX/MINI-ITX
Drive Bays 5.25”Drive Bays×0; 3.5“/2.5”Drive Bays×2; 2.5“Drive Bays×3
Expansion Slots 5
Cooling Fans Pre-installed: Rear: 1×120mm fan; Top: 1×120mm RGB fan Optional: Front: 2×120 or 1×140; Top: 2×120/ 2×140mm Bottom: 2×120mm in case of PSU installed at top
CPU Cooler Compatibility 168mm height limit /Liquid Cooler: 120mm radiator liquid cooling system pre-installed at top; Optional: 120mm radiator at rear; 120/240/140/280mm radiator at top
Power Supply Support ATX PS2 (maximum length: 200mm at bottom, 160mm at top)
Graphic Card Clearance Maximum 340mm length
Carton Dimension 497×282×506mm
Water Block Dimensions 92.5×93×85mm(L×W×H)
Radiator Dimensions 154×120×27mm(L×W×H)(aluminum material)
Fan Dimensions 120×120×25mm RGB Fan
Fan Speed 500±150-1800±10%RPM (4Pin)
Fan Air Flow 69.34 CFM (MAX)
Fan Noise Level 17.8~30dB(A)
Fan Bearing Type Hydro Bearing
Fan Rated Voltage 12VDC
Fan Rated Current 0.32A
Fan Power Consumption 3.84W
Pump Connector 3Pin
Pump Operating Voltage 6~13.8VDC
Pump Rated Voltage 12VDC
Pump Speed 2300±10%RPM
Pump Current 0.2A(MAX)
Pump Power Consumption 2.4W
EAN (WH) 6933412713401
EAN 6933412713395

Product Dimension

  • Black or White System build of the BaronKase Liquid Cooling Case?
  • This Case Has a Built-In Flow Meter!
  • System Build